GPS&Bd Built-in Antenna GPS&BD Antenna with IPEX
1 .Product Introduction
The Delin Comm GPS&BD is an active antenna built from a ceramic antenna, a low noise amplifier and a feed - back cable.It has the following characteristics:
1.Low Voltage :2.7~3.3V
2.Low Noise Figure :<2.0
3.Gain :20±3dB
2 . Antenna Structure
3 .Technical characteristics
3.1Antenna body
(The above target test is based on 25X25mm ground)
3.2 Low noise amplifier
1 .Product Introduction
The Delin Comm GPS&BD is an active antenna built from a ceramic antenna, a low noise amplifier and a feed - back cable.It has the following characteristics:
1.Low Voltage :2.7~3.3V
2.Low Noise Figure :<2.0
3.Gain :20±3dB
2 . Antenna Structure
| Size | 25×25×6.7mm |
| Connector | IPEX head |
| Connecting Line | 1.13 line |
| Weight | 15 g |
| Working Temp. | -40ºC~80ºC |
| Operation Humidity | 10%~95% |
| Storage Temp. | -45ºC~85ºC |
| Storage Humidity | 10%~95% |
| Length of Lead | 100mm |
3 .Technical characteristics
3.1Antenna body
| Center Frequency | 1575.42&1561.09MHz |
| Tape Width | 10MHZ |
| Gain(Maximum direction) | 0dB |
| Gain (10 degrees elevation) | -5dB |
| Polarization | RCHP |
| Impedance | 10Ω |
3.2 Low noise amplifier
| Center Frequency | 1575.42&1561.09MHz |
| Gain | 20dB±3dB |
| Noise Figure | ≤2.0dB |
| V.S.W.R. | ≤2.0 dB |
| Working Voltage | 2.7-3.3V |
| Working Current | ≤12mA |
| Impedance | 50Ω |