| Description | Openwrt 4g sim only router with external antenna |
| Item no. | 4304 |
| Application Scenarios | Home,Office,IoT,Security |
| Concurrent Clients | 25 |
| CPU | MTK7628KN |
| Interface | 1*FE Mbps WAN,3*FE Mbps LAN |
| Button | Reset,WPS,Power |
| Power Suppply | DC 12V /1A |
| Flash/Memory | 2MB/8MB |
| SIM Card | Micro SIM |
| LED | PWR,WiFi,Internet,Interface,Signal Strength LED |
| Dimensions | 185*144*34mm |
| Antennas | 2.4G:2T2R 4G:2T2R |
| Antenna Gain | 5dBi |
| Frequency | 802.11b/g/n:2.4~2.4835GHz |
| Radio Rate | 2.4G: Up to 300Mbps |
| WPS | Support |
| Wireless Security | WPA-PSK/WPA2-PSK,WPA/WPA2 |
| Modulation | 11b:CCK,QPSK,BPSK 11g:OFDM 11n:QPSK,BPSK,16-QAM,64-QAM |
| Receiver Sensitivity | 2.4G: 11b: <-84dbm@11Mbps; 11g: <-69dbm@ 54Mbps; 11n: HT20<-67dbm HT40: <-64dbm |
| 4G Module | LTE CAT4 |
| Frequency | LTE-FDD: B1/B3/B5/B8/B28 LTE-TDD: B38/B39/B40/B41 WCDMA: B1/B8 TD-SCDMA: B34/B39 |
| GSM | 900MHz/1800MHz |
| GNSS | GPS, GLONASS, BeiDou/Compass, Galileo, QZSS |
| Mode | 4G wireless router |
| WiFi Setting | Wireless Setting,Channel bandwidth Setting,WPS |
| Status | CPU Status,Interface Status,4G Status Client List Internet Status |
| Network | LAN WAN DHCP APN |
| Traffic assistant | Statistics and display the usage of traffic in 4G mode |
| Sys | Username Managerment Reboot Upgrade/Restore/Bankup Sys time & date Sys logs |
| Setting Guide | Type of connect Internet Network WiFi |
| Operating Environment | Operating Temperature:Normal:0°C to +45°C; Operating Humidity:-20° C to +70° C Operating Humidity:5%~ 95% Storage Humidity:5%~ 95% |
| Dimension | Device: 185/144/34mm; |
| Pack Box: 281/278/51mm; | |
| Package | Device*1, Adapter*1, User manual*1, Antenna*4pc, Ethernet cable*1pc; |
Frequently Asked Questions
1. After the 4G card is plugged in, the 4G light of the 4G routing is not lit, which causes the Internet to be unavailable?
A: In one case, the 4G card is not inserted properly. You should cut off the power of the 4G routing and re-insert the card. In another case, the 4G card is not activated, and the card insert shall be used after activation according to the card manual. 2. 4G wireless router works normally, the 4G light is on, and the mobile phone is connected to 4G routing Wi-Fi but cannot access the Internet?
A: (1) Enter the routing setting page (the default is 172.16.0.1, the username and password are both admin), check the status---whether the WAN port obtains the IP address. If it is not obtained, it is recommended to reset the 4G wireless router reset. (2) Identify the Internet through the APN setting, insert the 4G card into the mobile phone, view the APN information on the mobile phone, and enter the 4G routing setting page---network setting---APN setting to fill the APN information of the mobile phone to 4G Routed APN settings.
3. 4G wireless router WAN port address is normal, 4G lights are normal, mobile phones cannot connect to Wi-Fi?
A:Each 4G card has a data plan. In this case, please check your data plan and recharge in time.
